Beyond Bending Tell You How
Installing an over the range microwave can be a great way to save space in your kitchen. Whirlpool offers a wide range of over the range microwaves that are easy to install. In this guide, we will explain step by step how to install a Whirlpool over the range microwave.
Before You Begin
Before you start the installation process, make sure you have all the necessary tools and materials. You will need a drill, a measuring tape, a pencil, a level, a screwdriver, and the installation instructions that come with your Whirlpool microwave. You may also need a helper to assist you with lifting and holding the microwave in place during installation.
Step 1: Prepare the Space
The first step in installing your Whirlpool over the range microwave is to prepare the space. Remove any existing microwave and clean the area where the new microwave will be installed. Measure the height of the space and verify that it meets the installation requirements listed in the installation instructions.
Step 2: Install the Mounting Plate
The mounting plate is the bracket that will hold the microwave in place. Begin by installing the mounting plate onto the wall using the provided screws and anchors. Use a level to ensure that the mounting plate is level and secure.
Step 3: Install the Exhaust Adapter
The exhaust adapter is the piece that connects the microwave to the vent system. Install the exhaust adapter onto the back of the microwave using the provided screws. Then, connect the vent duct to the adapter using the provided clamps.
Step 4: Install the Charcoal Filter
If your Whirlpool microwave is equipped with a charcoal filter, install it according to the instructions in the installation manual. This filter helps to remove cooking odors and should be replaced periodically.
Step 5: Mount the Microwave
With the help of a helper, lift the microwave and place it onto the mounting plate. Make sure that the microwave is level and secure. Then, use the provided screws to attach the microwave to the mounting plate.
Step 6: Connect the Power
Once the microwave is mounted, you can connect the power. Follow the instructions in the installation manual to connect the power cord to the microwave and to the electrical outlet.
Step 7: Test the Microwave
Before using your new Whirlpool over the range microwave, test it to ensure that it is working properly. Refer to the user manual for instructions on how to test the microwave.
Conclusion
Installing a Whirlpool over the range microwave is a straightforward process that can be completed by most homeowners. By following these steps and referring to the installation manual, you can enjoy the convenience of a new microwave in your kitchen.
