Beyond Bending Tell You How
Are you tired of your old and noisy kitchen exhaust fan? Do you want to get rid of the old and replace it with a new one? In this article, we will guide you step by step on how to replace your old kitchen exhaust fan with a new one. Follow these simple instructions to upgrade your kitchen and improve the air quality in your home.
Step 1: Turn Off the Power
The first and most important step in replacing an exhaust fan is to turn off the power to the fan. Locate the circuit breaker that controls the power to your kitchen exhaust fan and turn it off. This will prevent any accidents from happening while you are replacing the fan.
Step 2: Remove the Old Fan
Once the power is off, you can start removing the old kitchen exhaust fan. Remove the cover and unscrew the motor from the bracket. Carefully disconnect the wires from the old motor and remove it from the bracket. Make sure to keep all the screws and parts in a safe place as you will need them later on.
Step 3: Measure the Size of the Old Fan
Before you buy a new kitchen exhaust fan, it is important to measure the size of the old one. This will ensure that the new fan will fit perfectly in the old bracket. Measure the length and width of the old fan and write down the measurements. You can then use these measurements to buy a new fan that fits perfectly in the old bracket.
Step 4: Purchase a New Fan
Once you have measured the size of the old fan, it is time to purchase a new one. Look for a fan that has a similar size to the old one and has the same or higher CFM (cubic feet per minute) rating. This will ensure that the new fan has the same or better performance than the old one.
Step 5: Install the New Bracket
Before installing the new fan, you need to install the new bracket. The new bracket should fit perfectly in the old spot and should be screwed in place. Make sure the bracket is level and secure before proceeding to the next step.
Step 6: Connect the Wires to the New Fan
Once the new bracket is installed, it is time to connect the wires to the new fan. Follow the instructions that come with the new fan to connect the wires correctly. Make sure the wires are connected securely and tightly to prevent any accidents from happening.
Step 7: Install the New Fan
After connecting the wires, you can now install the new kitchen exhaust fan. Place the new fan on the bracket and screw it in place. Make sure the fan is level and secure before proceeding to the next step.
Step 8: Install the Cover
Once the new fan is installed, you can now install the cover. The cover should fit perfectly on the new fan and should be screwed in place. Make sure the cover is level and secure before turning on the power.
Step 9: Turn On the Power
After installing the new fan and cover, it is time to turn on the power. Go to the circuit breaker and turn on the power to the kitchen exhaust fan. Make sure the fan is working properly and is not making any strange noises.
Step 10: Test the Fan
After turning on the power, it is important to test the fan to make sure it is working properly. Turn on the fan and let it run for a few minutes. Make sure the air is flowing properly and that there are no strange noises coming from the fan. If everything is working properly, your new kitchen exhaust fan is ready to use.
Conclusion
Replacing an old kitchen exhaust fan is a simple and easy process. Just follow these simple steps to upgrade your kitchen and improve the air quality in your home. Remember to turn off the power before starting and to test the fan after installation to make sure it is working properly. With a new kitchen exhaust fan, you can enjoy cooking in a clean and fresh environment.
