Beyond Bending Tell You How
If you’re tired of your drawers slamming shut, then it’s time to install soft close drawer slides. These handy devices allow your drawers to close quietly and smoothly, and they’re easy to install. In this guide, we’ll take you through the steps to install soft close drawer slides in any type of cabinet.
Step 1: Measure Your Drawer
Before you start, you need to measure your drawer. Measure the length, width, and height of the inside of the drawer. This will help you determine the size of the drawer slides you need to purchase.
Step 2: Purchase Your Drawer Slides
Once you have your measurements, you can purchase the correct size of soft close drawer slides. You can find these at any hardware store or online. Make sure you buy two slides per drawer.
Step 3: Remove the Old Drawer Slides
If your drawer already has slides installed, you’ll need to remove them. To do this, look for the screws that hold the slides in place. Unscrew them and pull the slides out.
Step 4: Attach the Drawer Slides
Take one slide and attach it to the side of the drawer using screws. Make sure it’s level and flush with the bottom edge of the drawer. Repeat this step for the other slide.
Step 5: Install the Cabinet Slides
Next, you’ll need to attach the slides to the cabinet. Place one slide on each side of the cabinet and screw them into place. Make sure they’re level and flush with the bottom of the cabinet.
Step 6: Test the Drawer Slides
Now that you have the slides installed, test the drawer to make sure it opens and closes smoothly. If it doesn’t, adjust the slides until it does.
Step 7: Attach the Soft Close Mechanism
The soft close mechanism attaches to the drawer slide. Follow the manufacturer’s instructions to attach the mechanism.
Step 8: Test the Soft Close Mechanism
Test the soft close mechanism to make sure it’s working correctly. Close the drawer and see if it closes quietly and smoothly.
Step 9: Repeat for Other Drawers
If you have more than one drawer, repeat steps 1-8 for each drawer.
Step 10: Clean Up
Now that you’ve installed the soft close drawer slides, clean up any debris and put away your tools.
Tips and Tricks
– Make sure you purchase the correct size of soft close drawer slides for your drawers.- If your drawers are heavy, consider purchasing heavy-duty slides.- If your drawers are too wide, consider installing a center mount slide.- Always follow the manufacturer’s instructions for installing the soft close mechanism.
Conclusion
Installing soft close drawer slides is a simple project that can make a big difference in your home. With just a few tools and some patience, you can have quiet and smooth-closing drawers in no time.
