Installing Concealed Cabinet Hinges Made Easy

Concealed cabinet hinges are a great way to upgrade the look of your cabinets. They provide a clean, sleek appearance by hiding the hinges from view. Installing concealed cabinet hinges may seem daunting at first, but with the right tools and knowledge, it can be a simple process.

Tools and Materials Needed

Before starting the installation process, make sure you have the following tools and materials:

• Concealed cabinet hinges
• Drill
• Drill bits
• Screwdriver
• Tape measure
• Pencil
• Level
• Masking tape

Step 1: Remove the Old Hinges

Start by removing the old hinges from the cabinet doors and frames. Use a screwdriver to remove the screws that hold the hinges in place. Set the old hinges aside.

Step 2: Measure and Mark the Hinge Placement

Measure the height and width of the cabinet door and mark the center point on the back of the door with a pencil. Use a level to ensure the hinge placement is straight. Repeat this process for the cabinet frame.

Step 3: Drill Holes for the Hinges

Using a drill bit that is the same size as the screws that came with the hinges, drill holes in the cabinet door and frame where you marked the center point. Make sure the holes are deep enough to securely hold the screws.

Step 4: Attach the Hinges to the Door

Take one hinge and align it with the holes you drilled in the cabinet door. Use the screws that came with the hinge to attach it to the door. Repeat this process for the remaining hinges and the other cabinet doors.

Step 5: Attach the Hinges to the Frame

Align the hinges on the cabinet door with the corresponding hinges on the cabinet frame. Use the screws that came with the hinges to attach them to the frame. Make sure the screws are tight and secure.

Step 6: Adjust the Hinges

Test the doors to make sure they open and close smoothly. If they do not, adjust the hinges by loosening the screws slightly and moving the hinge up, down, left, or right until the door is aligned correctly. Once the door is aligned, tighten the screws.

Step 7: Add the Finishing Touches

Once the hinges are installed and adjusted, add the finishing touches by covering the screw heads with masking tape and painting or staining the cabinet doors and frames to match your desired finish.

Final Thoughts

Installing concealed cabinet hinges may seem like a daunting task, but with the right tools and knowledge, it can be a simple and rewarding process. Follow these steps to upgrade the look of your cabinets and enjoy the clean, sleek appearance that concealed hinges provide.