Beyond Bending Tell You How
If you are planning to move your NordicTrack treadmill or simply want to clean it thoroughly, you need to know how to take apart the machine properly. Disassembling your treadmill can be a daunting task, especially if you are not familiar with the process. In this article, we will guide you through the steps to take apart your NordicTrack treadmill with ease.
Step 1: Unplug the Treadmill and Remove the Safety Key
The first step to take apart your NordicTrack treadmill is to unplug the machine from the electrical outlet. Make sure the treadmill is turned off before unplugging it. Next, remove the safety key from the console and set it aside.
Step 2: Remove the Console
To remove the console, locate the screws on the back of the console and use a screwdriver to remove them. Once the screws are removed, gently lift up the console and disconnect the wires that are attached to it. Be sure to label each wire as you disconnect them to make reassembly easier.
Step 3: Remove the Handles
The next step is to remove the handles. Depending on the model of your NordicTrack treadmill, the handles may be attached with screws or clips. Use a screwdriver or pliers to remove the screws or gently pull on the clips to release the handles.
Step 4: Remove the Motor Cover
To remove the motor cover, locate the screws on the sides of the cover and use a screwdriver to remove them. Once the screws are removed, lift up the cover and set it aside.
Step 5: Remove the Walking Belt
Before removing the walking belt, make sure the treadmill is in its lowest incline setting. Next, loosen the bolts that hold the rear roller in place and slide the roller out of the treadmill. Gently lift up the walking belt and remove it from the treadmill.
Step 6: Remove the Rear Roller
The next step is to remove the rear roller. Locate the bolts that hold the roller in place and use a wrench to loosen them. Once the bolts are loosened, slide the roller out of the treadmill.
Step 7: Remove the Front Roller
Locate the bolts that hold the front roller in place and use a wrench to loosen them. Once the bolts are loosened, slide the roller out of the treadmill.
Step 8: Remove the Frame
The last step is to remove the frame. Locate the bolts that hold the frame in place and use a wrench to loosen them. Once the bolts are loosened, lift up the frame and remove it from the treadmill.
These are the steps to take apart your NordicTrack treadmill. Remember to label all wires and screws to make reassembly easier. If you are not confident in taking apart your treadmill, it is best to seek professional help.
People also ask:
1. How do I clean my NordicTrack treadmill?
Answer: To clean your NordicTrack treadmill, use a soft cloth and mild soap and water to wipe down the console, handrails, and frame. Avoid using abrasive cleaners or solvents.
2. How often should I lubricate my NordicTrack treadmill?
Answer: It is recommended to lubricate your NordicTrack treadmill every 150 miles or every six months, whichever comes first.
