Beyond Bending Tell You How
Are you curious about how to take apart an iPhone 6? Well, you’ve come to the right place! Whether you want to fix a broken screen or replace the battery, taking apart your iPhone 6 can be a daunting task. But with the right tools and a little bit of patience, you can do it yourself! In this article, we will guide you through the process of taking apart an iPhone 6 in a step-by-step manner.
Gather the Necessary Tools
Before you start, make sure you have all the tools you need. You will need a Pentalobe screwdriver, a Phillips screwdriver, a plastic spudger, a suction cup, and a tweezers. You can find these tools at your local electronics store or online.
Step 1: Turn Off Your iPhone 6
Before you start taking apart your iPhone 6, make sure to turn it off. This will prevent any damage to the phone and keep you safe.
Step 2: Remove the Two Pentalobe Screws
Using a Pentalobe screwdriver, remove the two screws at the bottom of your iPhone 6. These screws hold the screen in place.
Step 3: Use the Suction Cup
Place the suction cup on the bottom of your iPhone 6, just above the home button. Pull up on the suction cup to create a small gap between the screen and the rear case.
Step 4: Use the Plastic Spudger
Insert the plastic spudger into the gap you created with the suction cup. Gently pry the screen away from the rear case by moving the spudger along the bottom of the phone.
Step 5: Disconnect the Cables
Once the screen is loose, use a Phillips screwdriver to remove the metal plate over the battery connector. Then use the plastic spudger to disconnect the cables that connect the screen to the logic board. Be careful not to damage the cables.
Step 6: Remove the Screen
Once the cables are disconnected, you can lift the screen off the phone. Be careful not to damage any of the components inside the phone.
Step 7: Remove the Battery
Using a plastic spudger, gently pry the battery connector up from its socket on the logic board. Then use the plastic tab to pull the battery out of the phone.
Step 8: Remove the Logic Board
Remove the screws that hold the logic board in place, and then use a plastic spudger to disconnect any remaining cables. Once all the cables are disconnected, you can lift the logic board out of the phone.
Step 9: Remove the Remaining Components
Using a plastic spudger, remove any remaining components, such as the camera, speaker, and charging port. Be careful not to damage any of the components.
Step 10: Reassemble Your iPhone 6
Once you have replaced or fixed the necessary components, it’s time to reassemble your iPhone 6. Simply follow these steps in reverse order.
That’s it! You now know how to take apart an iPhone 6. Remember to take your time and be careful when working on your phone. Good luck!
People Also Ask:
Q: Is it easy to take apart an iPhone 6?
A: It can be challenging, but with the right tools and a little bit of patience, you can do it yourself.
Q: Do I need any special tools to take apart my iPhone 6?
A: Yes, you will need a Pentalobe screwdriver, a Phillips screwdriver, a plastic spudger, a suction cup, and a tweezers.
Q: Can I fix a broken screen myself?
A: Yes, you can replace the screen yourself, but it can be challenging. Make sure to follow the steps carefully.
