Beyond Bending Tell You How
Are you tired of trying to clean your Tervis tumbler and not being able to reach every nook and cranny? Taking apart your Tervis tumbler can be a great solution. Here’s how to do it:
Step 1: Remove the Lid
The first step in taking apart your Tervis tumbler is to remove the lid. This can usually be done by twisting it counterclockwise until it comes off.
Step 2: Separate the Tumbler
Next, you’ll want to separate the two parts of the tumbler. The easiest way to do this is to grip the top part of the tumbler with one hand and the bottom part with the other and pull them apart.
Step 3: Remove the Gasket
With the two parts of the tumbler separated, you should be able to see the gasket that seals them together. Carefully remove this gasket by pulling it out of the groove.
Step 4: Clean the Tumbler
Now that your Tervis tumbler is taken apart, it’s easy to clean it thoroughly. You can wash the two parts separately, and even scrub the inside of the tumbler with a brush if necessary. Once everything is clean, simply reassemble the tumbler by following these steps in reverse.
Step 5: Can You Dishwash Tervis Tumbler?
Yes, you can put your Tervis tumbler in the dishwasher. However, we recommend that you remove the gasket first and wash the two parts separately to ensure a thorough clean.
Step 6: How Often Should You Take Apart Your Tervis Tumbler?
There’s no set rule for how often you should take apart your Tervis tumbler. It really depends on how often you use it and what you put in it. If you notice that your tumbler is getting harder to clean, it’s probably time to take it apart and give it a thorough cleaning.
Step 7: What If I Can’t Get My Tervis Tumbler Apart?
If you’re having trouble separating the two parts of your Tervis tumbler, try running it under hot water for a few minutes. This can help loosen the seal and make it easier to pull apart.
Step 8: Can I Replace the Gasket?
If your Tervis tumbler’s gasket has worn out or become damaged, you can replace it. Simply contact Tervis customer service or visit a Tervis store to purchase a replacement gasket.
Step 9: How Do I Reassemble My Tervis Tumbler?
To reassemble your Tervis tumbler, start by inserting the gasket back into the groove in the top part of the tumbler. Then, align the two parts of the tumbler and push them together until they click into place. Finally, screw the lid back on.
Step 10: Can I Take Apart My Tervis Tumbler with a Straw?
No, we do not recommend taking apart your Tervis tumbler with a straw or any other tool. Doing so can damage the tumbler and possibly void the warranty.
