How to Fix a Leaking Mixer Tap Spout

If you have a leaking mixer tap spout, you may be wasting a lot of water and money. Luckily, fixing a leaking mixer tap spout is a relatively easy DIY job that most people can do with a few basic tools. In this article, we will guide you through the steps to fix a leaking mixer tap spout in a relaxed English language that is easy to understand and follow.

Step 1: Turn off the Water Supply

Before you start fixing the leaking mixer tap spout, you need to turn off the water supply. Look for the water shut off valve under the sink and turn it off. If you cannot find the water shut off valve, turn off the main water supply to your house.

Step 2: Remove the Tap Handle

Use a screwdriver or a wrench to remove the tap handle. Loosen the screw on the handle and pull it off. If the handle is stuck, use a pair of pliers or a handle puller to remove it.

Step 3: Remove the Cartridge

Use a pair of pliers to remove the cartridge. The cartridge is the part that controls the flow of water. If the cartridge is stuck, use a cartridge puller to remove it.

Step 4: Inspect the Cartridge

Inspect the cartridge for any signs of damage or wear and tear. If the cartridge is damaged, you need to replace it. If the cartridge is in good condition, clean it with a soft brush and vinegar.

Step 5: Replace the Cartridge

Insert the new cartridge into the tap and tighten it with a wrench. Make sure the cartridge is properly aligned and secured.

Step 6: Reassemble the Tap

Reassemble the tap by putting the handle back on and tightening the screw. Turn on the water supply and test the tap to make sure it is working properly.

Step 7: Check for Leaks

Check for leaks around the tap and spout. If there are any leaks, tighten the connections and check again.

Step 8: Replace the O-Rings

If the tap is still leaking, you may need to replace the O-rings. To do this, remove the spout and replace the O-rings with new ones. Make sure the O-rings are properly aligned and lubricated before reassembling the tap.

Step 9: Tighten the Connections

Check the connections between the tap and the sink for any loose or worn out parts. Tighten or replace any loose or worn out parts to ensure a proper seal.

Step 10: Call a Plumber

If you have tried all the above steps and the tap is still leaking, it may be time to call a plumber. A professional plumber will be able to diagnose the problem and provide a solution.

Conclusion

Fixing a leaking mixer tap spout is a relatively easy DIY job that most people can do with a few basic tools. Follow the steps outlined in this article to fix your leaking tap spout and save water and money. Remember to turn off the water supply before you start, inspect the cartridge for damage or wear and tear, and replace the O-rings if necessary. If you are unsure about any of the steps, or if the tap is still leaking after you have tried everything, call a plumber for help.