Beyond Bending Tell You How
Introduction
Drawer pulls are small but essential hardware pieces that add functionality and style to your drawers. Installing drawer pulls can be a simple DIY project that can be accomplished in just a few steps. In this article, we’ll guide you through the process of installing drawer pulls in a way that is easy to understand and follow.
Materials Needed
Before we start, let’s gather the materials needed:
- Drawer pulls
- Screws
- Drill
- Measuring tape
- Pencil
- Level
Step 1: Measure
The first step in installing drawer pulls is to measure the width of the drawer. Use a measuring tape to measure the distance between the two holes on the back of the drawer pull. Mark the center of the drawer with a pencil.
Step 2: Drill Holes
Using a drill bit that is slightly smaller than the screws that came with the drawer pulls, drill holes where you marked the center of the drawer.
Step 3: Install Screws
Insert the screws into the holes and tighten them with a screwdriver. Be careful not to over-tighten the screws as this can strip the wood.
Step 4: Attach Drawer Pulls
Line up the holes on the back of the drawer pull with the screws and gently push the pull onto the drawer. Once the pull is in place, tighten the screws until the pull is securely attached to the drawer.
Step 5: Check for Level
Once the drawer pull is attached, use a level to make sure it is straight. Adjust the position of the pull if necessary.
Step 6: Repeat
Repeat the above steps for each drawer pull, making sure to measure and mark each drawer before drilling holes.
Tips and Tricks
Here are some additional tips and tricks for installing drawer pulls:
- If your drawers are made of a soft wood, like pine, consider using a smaller drill bit to avoid splitting the wood.
- For a more accurate measurement, use a jig to ensure the holes are evenly spaced.
- If your drawer pulls have decorative screws, use a screwdriver with a matching head to avoid damaging the screws.
Conclusion
Installing drawer pulls is a simple DIY project that can add style and functionality to your drawers. With the right tools and a little patience, you can easily install drawer pulls in just a few steps. By following the steps outlined in this article, you can achieve a professional-looking finish that will last for years to come.
