Beyond Bending Tell You How
If you have a Delta kitchen faucet and you notice that it is dripping, don’t panic! A dripping faucet is a common problem that can be easily fixed. In this article, we will guide you step by step on how to fix a Delta kitchen faucet that is dripping.
What Causes a Delta Kitchen Faucet to Drip?
Before we dive into the solution, let’s talk about the possible causes of a dripping Delta kitchen faucet. The most common cause is a worn-out or damaged washer. The washer is a small rubber disc inside the faucet that controls the flow of water. Over time, the washer can become worn out or damaged, causing water to leak out of the faucet.Another possible cause of a dripping Delta kitchen faucet is a loose or damaged O-ring. The O-ring is a small rubber ring that sits around the base of the faucet spout. If the O-ring is loose or damaged, it can cause water to leak out of the faucet.
Tools You Will Need
Before you start fixing your Delta kitchen faucet, make sure you have the following tools handy:- Adjustable wrench- Screwdrivers (Phillips and flathead)- Needle-nose pliers- Replacement washers and O-rings (if necessary)
Step-by-Step Guide to Fixing a Dripping Delta Kitchen Faucet
Now that you have your tools ready, let’s start fixing your dripping Delta kitchen faucet!
Step 1: Turn off the water supply to the faucet. Locate the shut-off valve under the sink and turn it clockwise to shut off the water supply.
Step 2: Remove the faucet handle. Depending on your Delta kitchen faucet model, the handle may be attached by a screw or a hex nut. Use a screwdriver or an adjustable wrench to remove the screw or nut and then carefully lift off the handle.
Step 3: Remove the bonnet nut. The bonnet nut is a large nut that holds the faucet cartridge in place. Use an adjustable wrench to loosen and remove the bonnet nut.
Step 4: Remove the faucet cartridge. The cartridge is the part of the faucet that controls the flow of water. Gently pull the cartridge out of the faucet body using your hands or needle-nose pliers.
Step 5: Inspect the washer and O-ring. Check the washer and O-ring for signs of wear or damage. If they are worn or damaged, replace them with new ones.
Step 6: Reassemble the faucet. Put the new washer and O-ring in place and then insert the cartridge back into the faucet body. Tighten the bonnet nut with an adjustable wrench.
Step 7: Reattach the handle. Put the handle back in place and tighten the screw or nut with a screwdriver or adjustable wrench.
Step 8: Turn on the water supply. Turn the shut-off valve counterclockwise to turn on the water supply to the faucet.
Conclusion
Fixing a Delta kitchen faucet that is dripping is a simple and easy process that can save you money on your water bill. By following these step-by-step instructions, you can fix your dripping faucet in no time. Remember to always turn off the water supply before you start working on your faucet and to use the right tools for the job. Happy fixing!
