Beyond Bending Tell You How
The Taurus G2C is a popular handgun that is known for its reliability and affordability. If you own a Taurus G2C, it’s important to know how to take it apart for cleaning and maintenance purposes. In this article, we will guide you through the process of disassembling your Taurus G2C step by step.
Gather Your Tools
Before you start taking apart your Taurus G2C, you need to gather the necessary tools. You will need a flathead screwdriver, a punch tool or small nail, and a cleaning kit. Make sure your tools are clean and in good condition before starting.
Step 1: Clear the Gun
Before you start disassembling your Taurus G2C, you need to make sure it’s unloaded. Remove the magazine from the gun and check the chamber to ensure there is no round in it. Once you have confirmed that the gun is unloaded, you can start taking it apart.
Step 2: Remove the Slide
The first step in disassembling your Taurus G2C is to remove the slide. To do this, pull the slide back until you can see the takedown pin. Use your punch tool or small nail to push the takedown pin out from the other side. Once the takedown pin is removed, you can slide the slide forward and off the frame.
Step 3: Remove the Recoil Spring and Barrel
With the slide removed, you can now remove the recoil spring and barrel. Simply push the recoil spring forward and lift it out of the slide. Then, tilt the barrel up and lift it out of the slide. Set both the recoil spring and barrel aside for cleaning.
Step 4: Clean the Gun
With the Taurus G2C disassembled, you can now clean each part thoroughly. Use your cleaning kit to clean the slide, barrel, and recoil spring. Make sure to remove all debris and residue from each part.
Step 5: Reassemble the Gun
Once you have cleaned each part, you can now reassemble your Taurus G2C. Start by putting the barrel back into the slide, then insert the recoil spring into the slide as well. Slide the slide back onto the frame and insert the takedown pin. Push the takedown pin in until it clicks into place.
Step 6: Test the Gun
After reassembling your Taurus G2C, it’s important to test it before firing. First, check to make sure the gun is still unloaded. Then, pull the slide back and let it go to ensure it functions properly. If everything looks good, you can load the magazine and test fire the gun at a shooting range.
Overall, taking apart your Taurus G2C is a simple process that can be done with the right tools and a little bit of knowledge. Following these steps will allow you to clean and maintain your gun properly, ensuring its reliability and longevity.
People Also Ask
Q: How often should I clean my Taurus G2C?
A: It’s recommended to clean your Taurus G2C after every use or at least once a month if you don’t use it often.
Q: What is the best way to clean my Taurus G2C?
A: Use a gun cleaning kit and follow the manufacturer’s instructions. Make sure to remove all debris and residue from each part.
Q: Can I disassemble my Taurus G2C without any tools?
A: No, you need a flathead screwdriver, a punch tool or small nail, and a cleaning kit to disassemble your Taurus G2C.
