Beyond Bending Tell You How
The iPhone 6 is a popular device that has been around for a while. If you are an Apple user, it is likely that you have come across the need to take it apart for repair or replacement of parts. In this article, we will guide you on how to take apart your iPhone 6, step by step.
Tools You Will Need
Before you get started, you will need to have the necessary tools. These include:
1. Screwdriver
You will need a screwdriver specifically designed for iPhone 6. This screwdriver has a pentalobe shape and is used to remove the two screws at the bottom of the device.
2. Plastic Spudger
This tool is used to separate the screen from the body of the device. It is made of plastic to prevent any scratches or damages to the device.
3. Suction Cup
The suction cup is used to lift the screen from the body of the device. It is important to use a strong suction cup to prevent the screen from breaking.
4. Tweezers
Tweezers are used to hold small parts in place and to avoid damaging the device with your fingers.
5. Plastic Opening Tool
This tool is used to open the clips that hold the screen to the body of the device.
Step-by-Step Guide
Now that you have the necessary tools, let’s get started on taking apart your iPhone 6:
Step 1: Power Off Your iPhone
Before you start taking apart your device, make sure it is turned off to avoid any damage to the internal components.
Step 2: Remove the Two Screws at the Bottom of the Device
Using the pentalobe screwdriver, remove the two screws located at the bottom of your device.
Step 3: Use the Plastic Spudger
Insert the plastic spudger between the screen and the body of the device. Gently pry the screen from the body of the device by moving the tool around the edges of the screen.
Step 4: Use the Suction Cup
Place the suction cup on the screen and gently lift it from the body of the device. Make sure the screen is at a 90-degree angle from the body of the device.
Step 5: Use the Plastic Opening Tool
Insert the plastic opening tool between the clips that hold the screen to the body of the device. Slowly move the tool around the edges of the device to release the clips.
Step 6: Disconnect the Battery
Locate the battery connector near the bottom of the device and gently disconnect it using the plastic spudger or tweezers.
Step 7: Remove the Rear-Facing Camera
Using the tweezers, remove the screws holding the rear-facing camera in place. Gently lift the camera from its position and disconnect it from the motherboard.
Step 8: Remove the Logic Board
Disconnect all the cables and screws holding the logic board in place. Gently lift the logic board from its position and remove it from the device.
Step 9: Remove the Front-Facing Camera and Sensors
Remove the screws and disconnect the cables that hold the front-facing camera and sensors in place. Gently lift them from their position and remove them from the device.
Step 10: Remove the Screen
Gently lift the screen from the body of the device and remove it completely.
Conclusion
Taking apart an iPhone 6 requires patience and attention to detail. With the right tools and guidance, you can easily replace or repair any part of your device. Always remember to power off your device before taking it apart to avoid any damage to the internal components.
Meta Description
Learn how to take apart your iPhone 6 with our step-by-step guide. We provide you with the necessary tools and instructions to help you repair or replace any part of your device.
Meta Keywords
iPhone 6, take apart iPhone 6, repair iPhone 6, replace iPhone 6 parts, iPhone 6 guide, iPhone 6 tools
