Beyond Bending Tell You How
Glock pistols are popular for their reliability and ease of use. However, it is essential to know how to take them apart for cleaning and maintenance purposes. If you’re new to Glock pistols, taking them apart can be intimidating, but with the right instructions, it can be a breeze. In this article, we will guide you through the process of taking apart a Glock pistol.
Step 1: Safety First
Before you begin to disassemble your Glock, ensure that the gun is unloaded. Remove the magazine and pull the slide back to check if there are any rounds in the chamber. Always point the gun in a safe direction and keep your finger off the trigger while handling it.
Step 2: Release the Slide
Once you’ve ensured that the gun is unloaded, pull the slide back slightly until you see the small notch on the rear of the slide. Push down on the slide stop lever located on the left side of the frame, and the slide should come forward off the frame.
Step 3: Remove the Recoil Spring and Barrel
With the slide removed, push the recoil spring assembly forward and then lift it out of the slide. After removing the recoil spring, tilt the barrel up and lift it out of the slide.
Step 4: Disassemble the Slide
Now that you’ve removed the barrel and recoil spring, you can disassemble the slide. Push the firing pin safety up to remove it from the slide. Afterward, push the firing pin assembly out from the back of the slide.
Step 5: Clean the Parts
Once you’ve taken apart your Glock, it’s time to clean the parts. Use a cleaning solvent and brush to clean each part thoroughly. Ensure that each part is dry before reassembling the gun.
Step 6: Reassemble the Slide
To reassemble the slide, begin by inserting the firing pin assembly back into the slide. Afterward, push the firing pin safety back into place. Finally, reinsert the barrel and recoil spring assembly back into the slide.
Step 7: Reassemble the Gun
With the slide reassembled, place it back onto the frame of the gun. Push the slide back, and it should lock into place. Finally, insert the magazine back into the gun.
That’s it! You’ve now successfully taken apart and reassembled your Glock pistol. Remember always to put safety first and ensure that the gun is unloaded before disassembling it.
People Also Ask:
How Often Should You Clean Your Glock?
You should clean your Glock pistol after every use. Regular cleaning and maintenance ensure that your Glock functions correctly and lasts longer.
Can You Disassemble a Glock Without Pulling the Trigger?
Yes, you can disassemble a Glock pistol without pulling the trigger. However, it is essential to ensure that the gun is unloaded before disassembling it.
Can You Use WD-40 to Clean a Glock?
No, you should not use WD-40 to clean your Glock. WD-40 is a water-displacing agent and not a lubricant. Use a cleaning solvent specifically designed for firearms instead.
