Beyond Bending Tell You How
Having a leaky faucet in your kitchen can be a frustrating problem, not to mention the waste of water and the extra cost on your water bill. But don’t worry, fixing a leaky kitchen faucet is actually quite easy and can be done in a few simple steps. In this article, we’ll show you how to fix a leaky kitchen faucet so you can save money and be more eco-friendly.
Step 1: Turn Off the Water Supply
Before you begin fixing your leaky kitchen faucet, you need to turn off the water supply. Look under your sink and find the shut-off valve. Turn the valve clockwise until the water supply is completely shut off.
Step 2: Remove the Faucet Handle
The next step is to remove the faucet handle. Most faucet handles are attached with a screw or a clip. If your faucet handle has a screw, use a screwdriver to remove it. If it has a clip, use pliers to remove it. Once you remove the screw or clip, you can lift the handle off the faucet.
Step 3: Remove the Cartridge
After you remove the faucet handle, you’ll see the cartridge. The cartridge is the part of the faucet that controls the water flow. To remove the cartridge, use pliers to loosen the retaining clip. Once the clip is loose, you can pull the cartridge out of the faucet.
Step 4: Replace the O-Ring
Now that you have the cartridge removed, you can inspect the O-ring. The O-ring is a small rubber ring that seals the cartridge in place. If the O-ring is worn or damaged, it can cause a leak. To replace the O-ring, use a small screwdriver to pry it off. Place the new O-ring in place and press it down firmly.
Step 5: Replace the Cartridge
Once you’ve replaced the O-ring, you can insert the cartridge back into the faucet. Make sure it’s in the correct position and then use pliers to tighten the retaining clip.
Step 6: Reassemble the Faucet Handle
Now it’s time to reassemble the faucet handle. Place the handle back on the faucet and use the screw or clip to secure it in place. Make sure it’s tight and snug.
Step 7: Turn On the Water Supply
Finally, turn on the water supply and test your faucet. If you’ve followed these steps correctly, your leaky kitchen faucet should be fixed and working properly.
Conclusion
Fixing a leaky kitchen faucet is a simple DIY project that can save you money and help the environment. By following these easy steps, you can fix your leaky faucet in no time.
