Beyond Bending Tell You How
A dishwasher is a great investment for your home, as it can save you time and effort when it comes to doing dishes. Installing a Whirlpool dishwasher is not as difficult as it may seem. In this article, we will provide you with an easy step-by-step guide on how to install a Whirlpool dishwasher.
Step 1: Preparation
Before you start installing your Whirlpool dishwasher, you need to make sure you have all the necessary tools and materials. Here is a list of what you will need:
- Whirlpool dishwasher
- Screwdriver
- Adjustable wrench
- Pliers
- Teflon tape
- Dishwasher installation kit
Once you have all the necessary tools and materials, you can proceed to the next step.
Step 2: Disconnect Power and Water Supply
Before you start installing your Whirlpool dishwasher, you need to disconnect the power and water supply to your current dishwasher. To do this, turn off the circuit breaker that supplies power to your dishwasher and shut off the water supply valve that is located under the sink.
Step 3: Remove the Old Dishwasher
Once you have disconnected the power and water supply, you can remove your old dishwasher. To do this, you need to unscrew the mounting brackets that are holding the dishwasher in place. Then, pull the dishwasher out of its location and disconnect the wiring and plumbing connections.
Step 4: Prepare the New Dishwasher
Before you install your new Whirlpool dishwasher, you need to prepare it. Start by removing the packaging and protective materials from the dishwasher. Then, remove the access panel at the bottom of the dishwasher and connect the drain hose and water supply line to the dishwasher.
Step 5: Install the Mounting Brackets
The next step is to install the mounting brackets for your new Whirlpool dishwasher. The brackets should be included in the dishwasher installation kit. To install the brackets, place them on the sides of the dishwasher and use screws to secure them in place.
Step 6: Slide the Dishwasher into Place
Once you have installed the mounting brackets, you can slide your new Whirlpool dishwasher into place. Make sure that the dishwasher is level and flush with the countertop.
Step 7: Connect the Wiring and Plumbing
The final step is to connect the wiring and plumbing for your new Whirlpool dishwasher. Start by connecting the dishwasher’s electrical wires to the electrical supply. Then, connect the dishwasher’s water supply line to the water supply valve under the sink. Finally, connect the dishwasher’s drain hose to the sink’s drain pipe.
Conclusion
Congratulations! You have successfully installed your new Whirlpool dishwasher. Following these easy steps, you can enjoy the convenience of a dishwasher in your home.
